+8801733580713 info@u-mtc.com

TLC 76 Ambulance

The Definitive 4X4 All-Terrain Passenger Vehicle

STREIT Group’s armored Toyota Land Cruiser 76 includes full vehicle armoring with certified steel and design to resist external ballistic threats from any angle, OEM components such as suspension and brake system are fully upgraded to support full weight of armor without compromising the vehicle’s performance. The high capacity wheel and tire assembly comprise of built-in run-flats and bead lock systems. In addition to the left hand drive Toyota Land Crusier 76, STREIT Group can offer right hand drive upon request.

SEATING LAYOUT & DIMENSIONS

Model : Toyota Land Cruiser 76
Engine : 4.5L D/M
Transmission : 5-speed Manual
Axle : Rigid live axle
Horse-Power : 228HP/170KW (with 4.0 L V6 – Eng) /200 KW 268HP(with 4.5 L V8 – Eng)
Torque : 360 NM/3600 RPM (with 4.0 L V6 – Eng) /290NM/2200RPM(with 4.5 L V8 -Eng)
Suspension : Front: Rigid live axle, leading arm,coil spring, oil dampers and antiroll bar. REAR: Rigid live axle,semi-elliptic leaf spring and oil dampers.
Steering Configuration : Power Steering
Tire-Size : 255/100/R16
Driving Configuration : 4WD
Door Configuration : 5 Door Configuration
CTIS : N/A
Brakes : Front – disc brakes, rear – drum brakes
Fuel Capacity : 90 + 90 L
Operating Range : 900 km
Length : 4730 mm
Width : 1800 mm
Height : 1955 mm
Wheel Base : 3180 mm
Ground Clearance : 235 mm
Curb Weight : 4720 kg
Payload Capacity : 800 kg
Gross Vehicle Weight : 5520 kg
Seating Type : OEM Seat
Seating Configuration : 5 = 2 + 3

 

ELECTRICAL SPECIFICATIONS
The Vehicle Is Featuring 12V 130A Electrical System
There Are Dual-mode Interior Dome Lights
Dome Lamps Are Featuring Special Illumination Mode When Light Beam Is Not Reaching The Body Glass Of The Vehicle Thus Preventing Violation Of Camouflage Of The Vehicle. Illumination Level Of Working Zone Of Interior In This Mode Is 5-7 Lx.
All Electrical Connectors Are Protected From Reversed Connection
Cable Runs For Various Electrical Systems Has Distinctive Color-coding.
Two (2) Headlamps With Main And Dipped Beams.
Two (2) Indicators Next To Headlamps.
Two (2) Tails Lamps, Two (2) Rear Indicators, Two (2) Stop Lights, One (1) Reverse Light.
Two (2) Rear View Mirrors On A-pillars.
Alternator 12v /100A.

 

BODY SPECIFICATIONS
INTERIOR
All Interior Components Have Been Fitted In Order To Ensure Maximum Operational Functionality Is

Attained All Original Interior Panels Trimmed And Installed To Maintain Original Appearance From Inside

And Outside.

Capsule Design Being Used For Armoring Process With 5 Piece Design Of Large Plates: Cold Formed Fire Wall, Ceiling, A,P,C Pillars With Side Plates, Rear Bulkhead With Hinge Door.
CLIMATE
A/C System To Provide Proper Operational Temperature For Occupancy.
Original Ventilation System Fully Functional To Provide Appropriate Operational Temperature And Comfort For The Occupancy.
SEATING
All OEM Seats Reinstlled With 3 Points Seat Belts.
EXTERIOR
Concealed Armoring Design Allowed For The Vehicle To Keep Low Profile And Appearance As OEM In

Order To Insure The Vehicles Appear As None Armored OEM Look.

Three Towing Hooks (2 Front And 1 Rear).
OEM Windshield Wipers.
Exhaust Pipes With Mesh.
Side View Mirrors.

 

ARMORING SPECIFICATIONS
Armor Consists Of All Welded Ballistic Grade Steel Construction.
Opaque Areas Including The Roof, & All Sides Of The Vehicle Provide Protection According To CEN Level Of Protection FB-6/FB-7/as Per Requested By Client, Floor Against Hand 2 X Granate DM-51
Engine Compartment Armored With Flanks Plates
Fuel Tanks Armoring: Against DM-51
Vehicle Body Is Fully Encapsulated To Provide Armor Protection To Occupants At All Points.
W/S, Front Doors, Rear Door Ballistic Curved Glass. And Right), 1 X Gun Port In The Rear Of The Vehicle.
ARMORING GLASS SPECIFICATIONS
A Combination Of Glass, Poly Carbonate And Mylar Are Bonded Together Using The Latest Technology,

Producing One Of The Finest Transparent Armors Available While Incorporating The Following Qualities:

Armoring Level Of Ballistic Glass Is CEN BR6
Anti-spall Shield Protecting Occupants Against Shattering Glass.
Multiple Impact Protection.
Finest Optical Quality, Minimal Distortion.
Minimal Delamination
Minimal Discoloration From UV Rays
ARMORING DOOR SPECIFICATIONS
The Vehicle Has Total Of 5 Doors: Left And Right Front Doors, Front And Right Rear Doors, Tail Gate Door With Ballistic Curved Glass.
All Doors Are Featuring Heavy Duty Hinges
Design Of The Doors, Hatches And Its Locks Prevents Unauthorized Access To The Vehicle And Ensures Fast Evacuation Of Crew In Case Of Emergency.
Doors Can Be Locked From Inside With Power Locks And Outside By Key.

 

WHEEL & TIRES SPECIFICATIONS
Run Flats On All Wheels
PAINT SPECIFICATIONS
Best Painting Material Used With Polyurethane Primer And Scratch Resistant Paint
Primer Gravel Coating & Anti-Rust
UV Protection & Undercoat